|
|
| Author |
Message |
< Erlang patches mailing list ~ Patches to R10B-3 to facilitate builds on OpenBSD 3.7 |
| geoffw at cybertribe.com |
 Posted: Wed Mar 23, 2005 4:33 pm |
 |
|
|
Guest
|
The following patches are needed to get Erlang R10B-3 to build and
install on OpenBSD 3.7-current.
I hope that the Erlang developers can vet these patches and get them
into the next release, especially the memsup.c patch. I've created a
"port" for OpenBSd but this patch has been outstanding for a couple of
patch releases against R10B. If you don't like this patch, fine but at
least do something to fix it.
Essential patch to memsup.c to allow the build to complete...
----------------------------------------------------------------------------
--- lib/os_mon/c_src/memsup.c.orig Wed Oct 2 14:16:37 2002
+++ lib/os_mon/c_src/memsup.c Sun Mar 13 01:44:20 2005
_at__at_ -95,7 +95,11 _at__at_
#ifdef BSD4_4
#include <sys/types.h>
#include <sys/sysctl.h>
-#include <vm/vm_param.h>
+#ifdef __OpenBSD__
+#include <sys/vmmeter.h>
+#else
+#include <vm/vm_param.h>
+#endif
#ifdef __FreeBSD__
#include <sys/vmmeter.h>
#endif
------------------------------------------------------------------------
(Essential) Allows the man pages to be properly built and installed
under openBSD...
----------------------------------------------------------------------------
--- erts/etc/unix/format_man_pages.orig Mon Sep 20 14:09:14 1999
+++ erts/etc/unix/format_man_pages Sun Mar 13 01:54:41 2005
_at__at_ -29,6 +29,8 _at__at_ case $SYS:$REL in
TARGET=sunos5 ;;
Linux:*)
TARGET=linux ;;
+ OpenBSD:3.*)
+ TARGET=openbsd ;;
*)
TARGET="" ;;
esac
_at__at_ -106,6 +108,8 _at__at_ then
else
if [ -f "/vmunix" ]; then
CATMAN=/usr/etc/catman
+ elif [ "$TARGET" = "openbsd" ]; then
+ CATMAN=/usr/sbin/catman
else
CATMAN=/usr/bin/catman
fi
---------------------------------------------------------------------------------
(optional) this prevents blow up if the path to perl involves "/" when a
"fake" install is happening.
----------------------------------------------------------------------------------
--- lib/snmp/mibs/Makefile.in.orig Fri Oct 1 04:54:31 2004
+++ lib/snmp/mibs/Makefile.in Sun Mar 13 22:07:36 2005
_at__at_ -121,7 +121,7 _at__at_ OTP_MIBDIR = $(shell if test -d ../../ot
debug opt: $(TARGET_FILES)
$(ERL_TOP)/lib/snmp/bin/snmp-v2tov1:
$(ERL_TOP)/lib/snmp/bin/snmp-v2tov1.src
- $(PERL) -p -e 's/%PERL%/$(PERL)/ ' < $< > $_at_
+ $(PERL) -p -e 's?%PERL%?$(PERL)? ' < $< > $_at_
chmod 755 $_at_
$(SNMP_BIN_TARGET_DIR)/OTP-REG.bin:
$(ERL_TOP)/lib/$(OTP_MIBDIR)/mibs/OTP-RE
G.mib
-----------------------------------------------------------
Post generated using Mail2Forum (http://m2f.sourceforge.net) |
|
|
| Back to top |
|
| bjorn at erix.ericsson.se |
| Posted: Thu Mar 24, 2005 6:07 am |
|
|
|
Guest
|
The memsup patch is already included in OTP R10B-4.
We'll try to include the other patches in R10B-5.
/Bjorn
Geoff White <geoffw_at_cybertribe.com> writes:
> The following patches are needed to get Erlang R10B-3 to build and
> install on OpenBSD 3.7-current.
> I hope that the Erlang developers can vet these patches and get them
> into the next release, especially the memsup.c patch. I've created a
> "port" for OpenBSd but this patch has been outstanding for a couple of
> patch releases against R10B. If you don't like this patch, fine but at
> least do something to fix it.
>
>
>
> Essential patch to memsup.c to allow the build to complete...
> ----------------------------------------------------------------------------
> --- lib/os_mon/c_src/memsup.c.orig Wed Oct 2 14:16:37 2002
> +++ lib/os_mon/c_src/memsup.c Sun Mar 13 01:44:20 2005
> _at__at_ -95,7 +95,11 _at__at_
> #ifdef BSD4_4
> #include <sys/types.h>
> #include <sys/sysctl.h>
> -#include <vm/vm_param.h>
> +#ifdef __OpenBSD__
> +#include <sys/vmmeter.h>
> +#else
> +#include <vm/vm_param.h>
> +#endif
> #ifdef __FreeBSD__
> #include <sys/vmmeter.h>
> #endif
>
> ------------------------------------------------------------------------
>
>
> (Essential) Allows the man pages to be properly built and installed
> under openBSD...
> ----------------------------------------------------------------------------
> --- erts/etc/unix/format_man_pages.orig Mon Sep 20 14:09:14 1999
> +++ erts/etc/unix/format_man_pages Sun Mar 13 01:54:41 2005
> _at__at_ -29,6 +29,8 _at__at_ case $SYS:$REL in
> TARGET=sunos5 ;;
> Linux:*)
> TARGET=linux ;;
> + OpenBSD:3.*)
> + TARGET=openbsd ;;
> *)
> TARGET="" ;;
> esac
> _at__at_ -106,6 +108,8 _at__at_ then
> else
> if [ -f "/vmunix" ]; then
> CATMAN=/usr/etc/catman
> + elif [ "$TARGET" = "openbsd" ]; then
> + CATMAN=/usr/sbin/catman
> else
> CATMAN=/usr/bin/catman
> fi
> ---------------------------------------------------------------------------------
> (optional) this prevents blow up if the path to perl involves "/" when
> a "fake" install is happening.
> ----------------------------------------------------------------------------------
> --- lib/snmp/mibs/Makefile.in.orig Fri Oct 1 04:54:31 2004
> +++ lib/snmp/mibs/Makefile.in Sun Mar 13 22:07:36 2005
> _at__at_ -121,7 +121,7 _at__at_ OTP_MIBDIR = $(shell if test -d ../../ot
> debug opt: $(TARGET_FILES)
> $(ERL_TOP)/lib/snmp/bin/snmp-v2tov1:
> $(ERL_TOP)/lib/snmp/bin/snmp-v2tov1.src
> - $(PERL) -p -e 's/%PERL%/$(PERL)/ ' < $< > $_at_
> + $(PERL) -p -e 's?%PERL%?$(PERL)? ' < $< > $_at_
> chmod 755 $_at_
> $(SNMP_BIN_TARGET_DIR)/OTP-REG.bin:
> $(ERL_TOP)/lib/$(OTP_MIBDIR)/mibs/OTP-RE
> G.mib
> -----------------------------------------------------------
>
--
Bj |
|
|
| Back to top |
|
|
|
All times are GMT
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum
|
|
|
Digg It
Del.icio.us
Reddit
Facebook
Stumble Upon
Technorati
