Erlang Mailing Lists
Author Message

<  RabbitMQ mailing list  ~  Fwd: Fwd: Errors using Windows .NET Client Library
Guest
Posted: Sun Mar 30, 2008 9:33 pm Reply with quote
Guest
Here is the log on RabbitMQ:

Thanks for your help.
Back to top
Guest
Posted: Mon Mar 31, 2008 7:54 am Reply with quote
Guest
Bill,,

BillC wrote:
> Here is the log on RabbitMQ:
>
> Thanks for your help. I just cleaned up the old log. Ran the publish
> program twice to enque two messages. Then I ran the subscriber program
> to deque twice.
>
> I see a lot of abrupt connection closures but no real explanations as to
> the reason.
>
>
> =INFO REPORT==== 30-Mar-2008::16:25:40 ===
> disk_log: repairing "c:/Documents and
> Settings/Development/rabbitmq/db/rabbit-mnesia/rabbit_persister.LOG" ...
>
> =INFO REPORT==== 30-Mar-2008::16:25:40 ===
> Repaired persister log - 22 recovered, 0 bad

That is an odd error. Do you get it every time you start the broker? How
are you stopping the broker?

That plus the tracer log you sent previously indicate that your test
uses persistent messages. There is nothing wrong with that but it may
explain why you are seeing errors when we don't. Try running your tests
with transient messages, after clearing out the previously persisted
messages (stop the broker, remove the persister log file mentioned above
and then restart the broker).


Matthias.

_______________________________________________
rabbitmq-discuss mailing list
rabbitmq-discuss@lists.rabbitmq.com
http://lists.rabbitmq.com/cgi-bin/mailman/listinfo/rabbitmq-discuss
Post recived from mailinglist
Back to top
Guest
Posted: Mon Mar 31, 2008 8:57 am Reply with quote
Guest
Matthias,
Back to top
Guest
Posted: Mon Mar 31, 2008 11:48 pm Reply with quote
Guest
Bill,

BillC wrote:
> Thanks for your response. I cleared everything in my Mnesia and Log
> files and restarted the broker. I also changed my props.DeliveryMode =
> 1 to make non persistent messages on basicpublish. I also ensured that
> my basicpublisher closes both the channel and connections properly in
> the basicpublisher code.

I was just trying to run your example and noticed that the consumer code
you sent the other day isn't well-formed - it contains an "else" without
an "if". Can you send through the exact code for both the publisher and
consumer you are running?

It would also be useful to get hold of the compiled code, for me to run
as a comparison. Perhaps you could post it on some upload service such
as uploading.com?


Matthias.

_______________________________________________
rabbitmq-discuss mailing list
rabbitmq-discuss@lists.rabbitmq.com
http://lists.rabbitmq.com/cgi-bin/mailman/listinfo/rabbitmq-discuss
Post recived from mailinglist
Back to top
Guest
Posted: Tue Apr 01, 2008 1:23 am Reply with quote
Guest
Matthias,

Thanks for looking at this for me.
Back to top
Guest
Posted: Tue Apr 01, 2008 1:30 am Reply with quote
Guest
Sorry I forgot to tell you that you can change the hostname, port ..etc in the app.config files to run the .exe without recompiling ....

BillC <billc@inworksol.com> wrote:
Quote:
Matthias,

Thanks for looking at this for me.
Back to top
Guest
Posted: Tue Apr 01, 2008 1:59 am Reply with quote
Guest
Bill,

BillC wrote:
> There are two folders:
> 1) ConsoleApplication2 is the Simple Subscriber
> 2) WindowsApplication1 is the Simple Publisher
>
> The directories contain the full source code and also in the debug/bin
> folder of each you will find the .exe as well as the RabbitMQ.dll that I
> am using.

I have run the exes of both apps against the broker at dev.rabbitmq.com
and everything worked fine - the subscriber is happily waiting for
messages to arrive and printing them.

That was using mono on debian though. You may want to consider switching
to that Wink

I'll try WinXP tomorrow.


Matthias.

_______________________________________________
rabbitmq-discuss mailing list
rabbitmq-discuss@lists.rabbitmq.com
http://lists.rabbitmq.com/cgi-bin/mailman/listinfo/rabbitmq-discuss
Post recived from mailinglist
Back to top

Display posts from previous:  

All times are GMT
View next topic
View previous topic
Page 1 of 1
Erlang Forum - Trap Exit Forum Index  ~  RabbitMQ mailing list
This forum is locked: you cannot post, reply to, or edit topics.

Jump to:  

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum
Hosted by Erlang Solutions    |    Powered by phpBB and NoseBleed v1.14