| Author |
Message |
|
| Guest |
 Posted: Sun Jul 11, 2010 6:00 pm |
 |
|
|
Guest
|
Hello,
The native chunks of modules loaded before the code server are never loaded, which makes it pretty pointless to natively compile them in the first place (with --enable-native-libs). A patch that loads them just after the code server is started can be found here:
git fetch git://github.com/pguyot/otp.git pg/load-native-code-for-early-modules
http://github.com/pguyot/otp/commit/2637b8a24e2d9ba3653e580f21a70976915dc201
As a side effect, this patch will decrease the load time of dialyzer on installations configured with --enable-native-libs. Indeed, dialyzer natively recompiles modules including some that were loaded before the code server (such as lists, gb_trees, etc.).
Regards,
Paul
--
Semiocast http://semiocast.com/
+33.175000290 - 62 bis rue Gay-Lussac, 75005 Paris
________________________________________________________________
erlang-patches (at) erlang.org mailing list.
See http://www.erlang.org/faq.html
To unsubscribe; mailto:erlang-patches-unsubscribe@erlang.org
Post received from mailinglist |
|
|
| Back to top |
|
| Guest |
| Posted: Sun Jul 11, 2010 6:01 pm |
|
|
|
Guest
|
Hello,
The native chunks of modules loaded before the code server are never loaded, which makes it pretty pointless to natively compile them in the first place (with --enable-native-libs). A patch that loads them just after the code server is started can be found here:
git fetch git://github.com/pguyot/otp.git pg/load-native-code-for-early-modules
http://github.com/pguyot/otp/commit/2637b8a24e2d9ba3653e580f21a70976915dc201
As a side effect, this patch will decrease the load time of dialyzer on installations configured with --enable-native-libs. Indeed, dialyzer natively recompiles modules including some that were loaded before the code server (such as lists, gb_trees, etc.).
Regards,
Paul
--
Semiocast http://semiocast.com/
+33.175000290 - 62 bis rue Gay-Lussac, 75005 Paris
________________________________________________________________
erlang-patches (at) erlang.org mailing list.
See http://www.erlang.org/faq.html
To unsubscribe; mailto:erlang-patches-unsubscribe@erlang.org
Post received from mailinglist |
|
|
| Back to top |
|
| Guest |
| Posted: Tue Jul 13, 2010 11:45 am |
|
|
|
Guest
|
On Sun, Jul 11, 2010 at 08:00:39PM +0200, Paul Guyot wrote:
> Hello,
>
> The native chunks of modules loaded before the code server are never loaded, which makes it pretty pointless to natively compile them in the first place (with --enable-native-libs). A patch that loads them just after the code server is started can be found here:
>
> git fetch git://github.com/pguyot/otp.git pg/load-native-code-for-early-modules
Thank you, looks fine! It will be included in 'pu'.
>
> http://github.com/pguyot/otp/commit/2637b8a24e2d9ba3653e580f21a70976915dc201
>
> As a side effect, this patch will decrease the load time of dialyzer on installations configured with --enable-native-libs. Indeed, dialyzer natively recompiles modules including some that were loaded before the code server (such as lists, gb_trees, etc.).
>
> Regards,
>
> Paul
> --
> Semiocast http://semiocast.com/
> +33.175000290 - 62 bis rue Gay-Lussac, 75005 Paris
>
>
> ________________________________________________________________
> erlang-patches (at) erlang.org mailing list.
> See http://www.erlang.org/faq.html
> To unsubscribe; mailto:erlang-patches-unsubscribe@erlang.org
>
--
/ Raimo Niskanen, Erlang/OTP, Ericsson AB
________________________________________________________________
erlang-patches (at) erlang.org mailing list.
See http://www.erlang.org/faq.html
To unsubscribe; mailto:erlang-patches-unsubscribe@erlang.org
Post received from mailinglist |
|
|
| Back to top |
|
| Guest |
| Posted: Tue Jul 13, 2010 11:46 am |
|
|
|
Guest
|
On Sun, Jul 11, 2010 at 08:00:39PM +0200, Paul Guyot wrote:
> Hello,
>
> The native chunks of modules loaded before the code server are never loaded, which makes it pretty pointless to natively compile them in the first place (with --enable-native-libs). A patch that loads them just after the code server is started can be found here:
>
> git fetch git://github.com/pguyot/otp.git pg/load-native-code-for-early-modules
Thank you, looks fine! It will be included in 'pu'.
>
> http://github.com/pguyot/otp/commit/2637b8a24e2d9ba3653e580f21a70976915dc201
>
> As a side effect, this patch will decrease the load time of dialyzer on installations configured with --enable-native-libs. Indeed, dialyzer natively recompiles modules including some that were loaded before the code server (such as lists, gb_trees, etc.).
>
> Regards,
>
> Paul
> --
> Semiocast http://semiocast.com/
> +33.175000290 - 62 bis rue Gay-Lussac, 75005 Paris
>
>
> ________________________________________________________________
> erlang-patches (at) erlang.org mailing list.
> See http://www.erlang.org/faq.html
> To unsubscribe; mailto:erlang-patches-unsubscribe@erlang.org
>
--
/ Raimo Niskanen, Erlang/OTP, Ericsson AB
________________________________________________________________
erlang-patches (at) erlang.org mailing list.
See http://www.erlang.org/faq.html
To unsubscribe; mailto:erlang-patches-unsubscribe@erlang.org
Post received from mailinglist |
|
|
| Back to top |
|
|
|
All times are GMT
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum
|
|
|
Digg It
Del.icio.us
Reddit
Facebook
Stumble Upon
Technorati
